Product details
Number of control axes |
2axes (X, Z) |
Minimum programming |
0.001mm |
Maximum programming |
± 99999.999mm |
Top speed |
30m / min |
Feed speed |
0.001-15m / min |
Manual continuous |
One axis or simultaneous multi-axis |
Interpolation method |
Straight line, arc, thread interpolation |
Tool offset |
Length compensation, nose radius C compensation |
Spindle functions |
Gear, dual analog control, rigid tapping |
Handwheel functions |
Panel type, plug-in hand-held |
Screen saver function |
Screen saver function |
Communication function |
RS232, U disk interface |
Compensation function |
Knife compensation, between compensation, screw compensation, radius compensation |
Program editing |
Male / English, relative / absolute programming |
Limit function |
Software limit, hardware limit |
Pre-reading function |
Short line preprocessing 10,000 lines |
Password protection |
Multi-level password protection |
Input and output |
I / O point 24X24 |
PLC programming |
The user is free to design PLC function |
Acceleration and deceleration control |
Linear acceleration and deceleration, the number of additions and subtractions |
Encoder lines |
Any setting |
User macro program |
Yes |
Electronic gear functions |
Yes |
Number of control axes |
2axes (X, Y) |
Minimum programming |
0.001mm |
1) 2-5 Axis Fully English Type CNC lathe controller
2) 800x600 8.4 inch real color LCD displayer
3) Electric Turret & Binary code turret,Max: 99 pcs tools
4) Support ATC , Macro function and PLC function
5) Max speed is 60m/min, feeding speed is 24m/min
6) Adapted servo spindle can realize spindle continous position,rigid tapping,rigid screw processing
7) High anti-jamming switch power(100V-240VAC 50Hz/60Hz -> 24VDC)
8) 64MB Memory , 56Mb user store room
9) With USB interface,it supports file operation in flash disk,system configuration and software upgrade
10) Position Control Mode:Pulse+Direction/AB Phase,Dual Analog voltage output of 0~10V
11) 32 bits ARM microprocessor+FPGA Technology.
12) Basic I/O: 36X36 , can be edited freely
13) Cutter offset : C
14) Installing dimension, electric interfaces, instruction system and operating windows being
compatible with those of GSK980TDb Turning CNC System
Application: CNC Lathe & Turning Machinery and specially automatic equipment
FAQ
Q: Which payment form you can accept?
A: T/T, Western Union, PayPal etc. We accept any convenient and swift payment term.
Q: Which certificate do you have?
A: CE and ER
Q: Do you have the test and audit service?
A: Yes, we can assist to get the designated test report for product and the designated factory audit report.
If you have another question, pls feel free to contact us as below
http://www.szghtech.com/